Follow the instructions below to configure Eudora 5.1 for use with your POP3 account.

Note: An example account name was used through the instructions. Please substitute your POP3 email address information for the account used in the instructions.

The example address is: yourname@yourdomain.com
Account name is: yourname@yourdomain.com
Domain is: yourdomain.com

Configuration Steps:

1. Start the Eudora program from your desktop or from the Eudora Program group menu (go to the Start button on Windows, choose Programs and then choose Eudora).

At the main Eudora screen, click on the Tools menu item, then select Options from the pull down menu. (see below)

2. Choose the Getting Started icon/button. On this screen you will need to fill in the Real Name, Return Address, Mail Server (Incoming), Login Name and SMTP Server (Outgoing) values.

Note: Your login name is your FULL POP3 email address. The box labeled "Allow Authentication" underneath the Outgoing mail server box should also be checked (turned on)

3. Click on the Checking Mail icon/button. The values for Mail Server and Login Name should already reflect your changes made earlier in step 2. (Verify that the Mail Server and Login Name are completed.)

Note: "Secure Sockets when Receiving" should be set to NEVER as shown in the above image.

4. Click on the Incoming Mail icon/button. Verify that Server configuration is set to POP and that Authentication style is set to "Passwords" or "APOP".

5. Click on the Sending Mail icon/button. The values for SMTP Server and Return Address should already reflect your changes made earlier. If not, change them to the correct settings for your account.

Make sure that the Allow Authentication box is checked (turned on). Also make sure that "Secure sockets when sending" is set to NEVER as shown above.

6. Click OK after making your changes.

Configuration is complete!